Inquiry Basket (
Home » Product List » Copper Wire Drawing Machine » Copper Wire Drawing Machine with Continuous Annealer (LHT-250/17)
Product Details
Copper Wire Drawing Machine with Continuous Annealer (LHT-250/17)
| Model NO.: | LHT-250/17 |
|---|---|
| Origin: | China |
| Export Markets: | North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe |
Product Description
Application and composition
1. It works to draw ø 3.0 or ø 3.5 mm copper wire into ø 0.4~1.6mm wire which is annealed continuously during drawing.
2. It is composed of pay-off stand, main drawing machine, annealer, tension device, take-up, steam generator, pointing and threading unit and electrical control system.
| Main machine | |||
| Dia of inlet | Φ 3.0mm (Max Φ 3.5 ) | Dia of outlet | Φ 0.4~2.5(2.8)mm |
| Max. delivery speed | 25m /s(two mechanical speed change) | Max. number of drawing pass | 17 |
| Dia of final capstan | Φ 250mm | Max. diameter of drawing capstan | Φ 250mm |
| Speed ratio of drawing capstans | 1.23(outlet 1.18) | Distribution of drawing capstans | 4shafts, single layer |
| Max. size of die | Φ 28 × 25mm | Drawing motor | 55kW(AC) |
| Mechanical transmission mode | High precision bevel wheel transmission, set a less oil protection | Drawing capstans surface treatment | Cone pulley spayed with diamondite, final capstan |
| Drawing lubrication | Drawing capstan fully-immersed, die holder lubricated singly | Encloser of drawing area | Corrosion resistant plate |
| Annealer | |||
| Input diameter | Φ 0.4~2.5(2.8)mm | Max. annealing current | 2000A (DC) |
|
Annealing capacity |
175kWA |
Steam volume (pressure> 0.2MPa) | 4kg /h |
| Max. annealing voltage | 55V (DC) | Compressed air(prepared by user) | 200L /min |
| Annealing speed | 2~ 20m /s (select by the input diameter ) | Weight | 2500kg |
| Diameter of annealing pulley | Φ 250mm | Overall dimension (L× W× H ) | 1600 × 1400× 2700 |
| Remark: contact continuous annealing with three sections: preheating, annealing and drying., equipped with whole set cooling device. | |||
| Tension device | |||
| Compressed air(prepared by user) | 200L /min | Compressed air pressure | ≥ 0.5MPa |
| Tension swing angle | ± 30 ° | Diameter of measuring wheel | Φ 160mm |
| Take-up and traversing stand | |||
| Traversing mode | AC frequency control | Motor for traversing | 550W |
| Speed | 1500m /mm | Bobbin size | PND400, PND500, PND630 |
| Bobbin tightening | Cylinder moving | Motor for take-up | 15kW, AC frequency control |
| Bobbin lifting | Cylinder lifting | Brake mode | Plane clamp brake |
